Autonics Encoders

E30S - Incremental encoders of the E30S series have a compact size, so they are easy to use when tightly mounted and installed in a confined space. Due to the small moment of inertia of the shaft, the impact on the attached rotating equipment is minimized. The encoders are available with different control outputs.

Main Features:

• The case is 30mm in diameter, the solid shaft is 4mm in diameter.
• Convenient installation in cramped or confined spaces.
• Low moment of inertia of the shaft.
• Various resolutions: up to 3000 pulses per revolution.
• Various control output options.
• Power supply: 5V DC ±5%, 12-24V DC ±5%.

The E40S series of incremental encoders in a compact 40mm housing with a protruding shaft are compact in size, so they are easy to use with tight mounting and install in a confined space. Due to the small moment of inertia of the shaft, the impact on the attached rotating equipment is minimized.

Main Features:

• Incremental encoders with a case diameter of 40 mm.
• Models with a protruding, hollow through, hollow blind shaft are available in the 40 series.
• Convenient installation in cramped or confined spaces.
• Low moment of inertia of the shaft.
• Various resolutions: from 1 to 5000 pulses per revolution.
• Various control output options.
• Power supply: 5V DC ±5%, 12-24V DC ±5%.

The E50S series is an incremental encoder with a protruding shaft, measuring 50mm and providing accurate measurement of angle, position, rotation speed, speed, acceleration and distance. These encoders are available as cable models, cable connector models, axial/radial connector models, and different control outputs.

Main Features:

• The body is 50mm in diameter, the solid shaft is 8mm in diameter.
• Accurate measurement of angle, position, number of revolutions, speed, acceleration and distance.
• Available in versions with cable, with connector and cable, with connector on the side or on the back.
• Various resolutions: from 1 to 8000 pulses per revolution.
• Various control output options.
• Power supply: 5V DC ±5%, 12-24V DC ±5%.

E58SC - The incremental encoders of the E58SC series have flanges with a diameter of 58mm and provide accurate measurement of angle, position, rotation speed, speed, acceleration and distance. These encoders are available as cable models, cable connector models, axial/radial connector models, and different control outputs.

Main Features:

• Incremental encoders with 58mm diameter flanges.
• Accurate measurement of angle, position, number of revolutions, speed, acceleration and distance.
• Models with a protruding, hollow through, hollow blind shaft are available in the 58 series.
• Available in versions with cable, with connector and cable, with connector on the side or on the back.
• Various resolutions: from 1 to 8000 pulses per revolution.
• Various control output options.
• Power supply: 5V DC ±5%, 12-24V DC ±5%.

The ENC series - Incremental encoders with the ENC series measuring wheel are ideal for measuring the length or speed of continuously moving objects. The output signal level of the measured distance varies in proportion to the units of the international system of weights and measures (meters/ inches). These encoders can be used in packaging, rolling, and textile equipment, as well as other industrial equipment.

Main Features:

• Wheel type encoders are ideal for measuring the length or speed of continuously moving objects.
• The shape of the output signal of the measured distance is proportional to the units of the international system of weights and measures (meters/inches).
• Power supply: 5V DC ±5%, 12-24V DC ±5%.