FNIRSI DPOX180H Portable Oscilloscope
A portable oscilloscope from Fnirsi DPOX180H is in stock at CHIP and DIP.
The DPOX180H is a 2-channel oscilloscope with a DDS signal generator with a bandwidth of 180 MHz and a sampling rate of 500MSa/s. It features an innovative digital trigger system, cursor measurement function, 5mV sensitivity, 50000wfm/s refresh rate, 2.8-inch IPS display, built-in 4.2V/3000mAh battery, automatic shutdown and high voltage protection.
The DPOX180H minimizes noise and waveform distortion thanks to advanced digital phosphor technology. The X-Y mode makes it easy to compare the amplitude, frequency, and phase of two signals.
The oscilloscope provides automatic bandwidth limitation that adapts to the time range, filtering out noise for clearer signal analysis.
Functional Signal Generator: Has 20M DDS with 14 waveforms, 1VPP amplitude, 20MHz sine wave frequency and 10MHz for other waveforms. Its technology provides a more accurate and realistic output signal than traditional generators.
One click to save a screenshot or waveform, while in a separate data warehouse you can view the saved file and waveform data. The data can be exported to a computer via a USB connection.
Specifications
- 2 channels x 180MHz
- Built-in signal generator with 14 waveforms
- Sampling rate 500MSa/s
- Recording depth 32kb
- Maximum measured voltage ±400V
- Lifting time 2.5nS
- Vertical sensitivity 5mV~10V(1X)
- IPX6 water resistance level
- Storage depth 120Kpts
- Cursor Measurement - Frequency / Period / Amplitude
- The startup mode is Automatic / Single / Regular
- Russian language support
The full instructions in Russian are available on our website.
In scroll mode, keep track of the changes in real time.
The design of the analog interface input stage can withstand high voltage. The overall design of the device can withstand voltage up to 400V and prevent failure in an emergency.
Built-in signal generator with 14 waveforms.
Select a part or the entire fragment of the signals measured by the oscilloscope and save it as a sample of the output signal of the oscillator. You can save up to 500 customized signals.
