New multimeters from Mastech MS890C+ and MS890D+

23.09.2024

The CHIP and DIP warehouse has a new arrival of Mastech products, new MS890C+ and MS890D+. Multimeters have the widest measurement capabilities, support True RMS, NCV and live wire recognition.

Main features of the MS890D+

Mastech MS890D+
  • Frequency 1000 Hz
  • The true RMS value is True RMS
  • Overload protection
  • Checking transistors / Diodes / Continuity / LEDs
  • Non-contact Voltage Detection (NCV) / Live Wire Detection (Live)
  • Display bit depth: 4000 counts
  • CAT IV 600 V / CAT III 1000 V
MS890D+RangeAccuracy
Resistance 400Ohm, 4KOhm, 40KOhm, 400KOhm, 4MOhm ±(0.8%+3)
40MOhm ±(1.0%+25)
Constant voltage 400mV, 4V, 40V, 400V ±(0.5%+2)
1000V ±(0.7%+10)
Alternating voltage 4V, 40V, 400V ±(0.8%+3)
750V ±(1.0%+5)
Direct current 400uA ±(1.0%+5)
4mA, 40mA, 400mA ±(0.8%+5)
20A ±(1.0%+10)
Alternating current40mA, 400mA ±(1.5%+5)
20A ±(1.0%+10)
Frequency 1Hz ~ 1KHz ±(0.1%+2)
Container 1nF ~ 10nF ±(4.0%+25)
100nF ~ 100uF ±(4.0%+15)
1mF ~ 40mF ±(5.0%+25)
Temperature-20°C~ 1000°C ±(2.0%+3)

Main Features of MS890C+

Mastech MS890C+
  • Frequency 10 MHz
  • True RMS value
  • Overload protection
  • Checking Diodes / Continuity/ LEDs
  • V.F.C and Bar Graph function
  • Non-contact Voltage Detection (NCV) / Live Wire Detection (Live)
  • Display bit depth: 6000 counts
  • CAT IV 600 V / CAT III 1000 V
MS890C+RangeAccuracy
Resistance 600Ohm, 6KOhm, 60KOhm, 600KOhm, 6MOhm ±(0.8%+3)
60MOhm ±(1.0%+25)
Constant voltage 600mV, 6V, 60V, 600V ±(0.5%+2)
1000V ±(0.7%+10)
Alternating voltage 6V, 60V, 600V ±(0.8%+3)
750V ±(1.0%+5)
V-Lowz (Low input impedance) 600V DC ±(0.5%+10)
AC ±(0.8%+10)
Direct current 600uA ±(1.0%+5)
6mA, 60mA, 600mA ±(0.8%+5)
10A ±(1.0%+10)
Alternating current60mA, 600mA ±(1.5%+5)
6A, 10A ±(1.0%+10)
Frequency 1Hz ~ 10MHz ±(0.1%+2)
Container 60nF ±(4.0%+25)
600nF ~ 600uF ±(4.0%+15)
6mF ~ 60mF ±(5.0%+25)
Temperature-20°C ~ 400°C±(2.0%+3)
400°C ~ 1000°C ±(2.0%+3)