NUCLEO-F334R8, Nucleo-64 debugging board based on STM32F334R8T6 MCU, ST-LINK/V2-1, Arduino interface

The STM32 Nucleo-64 series debugging board provides an affordable and flexible way for users to try new concepts and create prototypes using the STM32 microcontroller, choosing from various combinations of performance, power consumption and functions. Support for the Arduino Uno V3 interface and the ST morpho connector make it easy to extend the functionality of the Nucleo-64 open development platform. No additional hardware is required for programming, the ST-LINK programmer is already built into the board.

Features of NUCLEO-F334R8:
- STM32F334R8T6 microcontroller: ARM Cortex-M4 + FPU + DSP, up to 72 MHz, 64 KB Flash, 16 KB RAM, 2 x ADC, 3 x DAC, 3 comp., operational amplifier, 217 ps 10 channels (HRTIM1), LQFP64 enclosure;
- 1 custom LED shared with ARDUINO;
- 1 custom and 1 reset button;
- 32.768 khz quartz oscillator;
- ARDUINO Uno V3 Expansion Connector;
- ST morpho expansion connectors for full access to all STM32 inputs/outputs;
- USB Micro-B connector for ST-LINK/V2-1;
- Flexible power options: ST-LINK USB VBUS or external sources;
- Built-in ST-LINK debugger/programmer with USB renumbering capability: storage device, virtual COM port and debugging port;
- Free software libraries and examples available in the MCU STM32Cube package;
- Support for a wide selection of integrated development environments (IDEs), including IAR Embedded Workbench, MDK-ARM and STM32CubeIDE.

Package contents:
- 1 x NUCLEO-F334R8 debugging board.