ADM3065EARZ, RS-485 Interface IC 3.0 V to 5.5 V, 12 kV IEC ESD Protected, Half Duplex 50 Mbps RS-485 Transceiver

ADM3065EARZ, RS-485 Interface IC 3.0 V to 5.5 V, 12 kV IEC ESD Protected, Half Duplex 50 Mbps RS-485 Transceiver
Изображения служат только для ознакомления,
см. техническую документацию
5 400 ֏
от 10 шт.4 210 ֏
от 98 шт.3 140 ֏
от 294 шт.2 610 ֏
Добавить в корзину 1 шт. на сумму 5 400 ֏
Номенклатурный номер: 8004690080
Бренд: Analog Devices

Описание

Semiconductors\Interface ICs\RS-485 Interface IC
Position Sensing Interface Solutions

Analog Devices Inc. Position Sensing Interface Solutions are designed for closed-loop mechanical control systems across a wide range of industries including automotive, industrial automation, process control, and military and aerospace. These sensors can measure the position of various mechanical systems. Some of these measurements include the position of the robot arm, angular position of electric motor shaft, linear displacement of a hydraulic valve, and position of aircraft flight control surfaces.

Технические параметры

Brand: Analog Devices
Data Rate: 50 Mb/s
Development Kit: EVAL-ADM3065EEBZ
Duplex: Half Duplex
ESD Protection: 12 kV
Factory Pack Quantity: Factory Pack Quantity: 98
Function: Transceiver
Input Voltage: 3 V to 5.5 V
Manufacturer: Analog Devices Inc.
Maximum Operating Temperature: +125 C
Minimum Operating Temperature: -40 C
Mounting Style: SMD/SMT
Number of Drivers: 1 Driver
Number of Receivers: 1 Receiver
Operating Supply Current: 107 mA
Operating Supply Voltage: 3 V to 5.5 V
Output Current: 250 mA
Package / Case: SOIC-8
Packaging: Tube
Product Category: RS-485 Interface IC
Product Type: RS-485 Interface IC
Product: RS-485 Transceivers
Propagation Delay Time: 9 ns
Series: ADM3065E
Shutdown: Shutdown
Subcategory: Interface ICs
Supply Voltage - Max: 5.5 V
Supply Voltage - Min: 3 V
Type: Transceiver
Data Rate 50MBPS(kbps)
Data Transmission Topology Multipoint
Driving Mode 3-STATE
Dual Supply Voltage (Max) Not Required(V)
Dual Supply Voltage (Min) Not Required(V)
Dual Supply Voltage (Typ) Not Required(V)
Function LINE TRANSCEIVER
Interface Circuit Standard 1 RS-485
Mounting Surface Mount
Number of Drivers per Line NOT REQUIRED
Number of Receiver Enables NOT REQUIRED
Number of Receivers 1
Number of Receivers per Line NOT REQUIRED
Number of Transceivers 1
Number of Transmitter Enables NOT REQUIRED
Number of Transmitters 1
Operating Temp Range -40C to 85C
Operating Temperature Classification Industrial
Package Type SOIC N
Packaging Tape and Reel
Pin Count 8
Power Supply Requirement Single
Rad Hardened No
Receiver Signal Type Differential
Single Supply Voltage (Max) 5.5(V)
Single Supply Voltage (Min) 3(V)
Single Supply Voltage (Typ) 3.3/5(V)
Transmitter Signal Type Differential
Вес, г 1

Техническая документация

Datasheet
pdf, 479 КБ
Datasheet
pdf, 1993 КБ