Housing for REA "Adaptive Micro" (CHUBB)

Overall dimensions

53x30x15 mm

Housing design

The housing consists of a base and a lid, which are connected into a single housing by means of projections on the base and grooves on the lid. The connection is tight.

Glue must be used to fix the halves of the housing.

On the two end sides of the case and on the front side, there are "zones of variable geometry". In these areas, various changes are possible at the stage of manufacturing the body by casting. For example: cutouts for connectors, buttons, switches, a "window" for installing an indicator, etc.

Mounting the printed circuit board

There are 4 mounting columns inside the base for mounting the PCB. The mounting columns have two stages of different diameters, which allow you to fix the printed circuit board at different heights.

Degree of protection

IP 40

Housing material

• High-impact polystyrene UPS-825. Color: Black, White, Light gray, Dark gray;
• ABS plastic. Color: Black, White, Light gray, Dark gray;
• ABS plastic with increased gloss. Color: black, white, light gray, dark gray.