› News › Smart water leak protection systems UJIN Water Control S-ALP-01 and S-ALP-02
Smart water leak protection systems UJIN Water Control S-ALP-01 and S-ALP-02
The UJIN Water Control S-ALP-01 and S-ALP-02 leak protection system is a ready—made solution for apartments, houses, offices and other types of premises. They are designed to detect and localize emergency situations in water supply and heating systems.
UJIN Water Control has five control options — automatic, scripted, in a mobile app, manual and using voice assistants. In case of a leak, the controller will receive a signal from the leak sensor, block the water using taps and notify about the emergency in the mobile application and the display on the case. The sensor will work within 2 seconds, and the water will be blocked within 6 seconds, then you will receive an instant push notification on your phone.
The UJIN water leak protection system can work autonomously even in the absence of the Internet. In addition, it is possible to manually open and close the taps during a power outage.
All devices from the water leak protection system kit can be purchased separately. Up to 10 wireless leak sensors and 1 wired sensor can be connected to the UJIN Water Control.
Technical characteristics of devices in the UJIN Water Control leak protection system:
Ujin Aqua Leak Controller
110-240 V 50 Hz
no more than 3 watts
screw terminal block
Wire cross section
not more than 2.5 mm2
wireless, Wi-Fi 2.4GHz
Wireless channel antenna
Application Control Protocol
«Cloud Secure Socket», Certificate No.2019660957, AES128 encryption, with dynamic keys
Radio transmitter power
no more than +19.5 dBm (89.12 MW) for 802.11b and no more than +16 dBm (39.81 MW) for 802.11n
The maximum number of connected cranes with electric drive